Skip to product information
1 of 15

U.S. Army

XIX Corps v2

XIX Corps v2

Holographic die-cut decal that shifts rainbow when it catches the light. Also comes in 1 other finish.

Regular price $6.49 USD
Regular price Sale price $6.49 USD
Sale Sold out

$5.51 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
Sticker type Same design, 2 ways
SizeMeasured on the longest side
Finish

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Outdoor-ready vinylUV-laminated, water resistant, cut to the shape.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

XIX Corps v2 (U.S. Army) Holographic STICKER Die-Cut Vinyl Decal

This design centres a single maroon bell silhouette, set against a flat field of deep red with a gold outline tracing its shape.

Visual Elements & Composition

Maroon dominates the composition, covering roughly seventy percent of the design, with gold accounting for most of the remainder. The bell sits at the centre as the only figure, rendered in flat vector shapes with no shading or texture. A yellow outline defines its edge and gives the form its crisp, heraldic clarity. The designation XIX Corps 3 anchors the artwork, with its alphanumeric title stated directly and nothing added around it.

Meaning & Symbolism

The design follows the conventions of military insignia, where a single emblem and a restrained palette carry the identity of a unit. The XIX Corps was a corps-level formation of the United States Army, and its designation is the core of the piece. The bell is the central symbol, a device that marks the unit visually in the same way the number and colours do. The formal mood of the palette reflects the structured, administrative character of unit identification.

On the Sticker

A sticker is cut to its own outline, so the gold edge and the bell silhouette become one continuous shape. Because the emblem is a single bold figure rather than fine detail, the outline reads clearly at close range, where the sticker is typically viewed and handled. The design is built to be seen at a glance on a flat surface, with the bell and the designation holding the eye together.

View full details

About this design

XIX Corps v2

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
U.S. Army
Comes on
2 sticker types
Price
$6.49 – $9.99
Sizes
5 options

Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.

Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.

  • Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
  • Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
  • Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
  • Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
  • Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.

Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.

  1. Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
  2. Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
  3. Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.

Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.

  • Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
  • Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
  • If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.

Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →