Skip to product information
1 of 12

Road Sign · Washington

WA-PSH21

WA-PSH21

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

WA-PSH21 (Washington) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This kiss-cut sticker reproduces a black and white Washington highway shield marked with the route number 21 and the state name, a design taken from the state's pre-1964 road signage.

Visual Elements & Composition

Black covers roughly two-thirds of the design and white forms the lettering and outlines, in a flat vector style. The shape is a rounded rectangle with a shield at its centre. The large numeral 21 sits in the middle, with WASHINGTON set along the top. A silhouette of George Washington appears within the composition, adding a patriotic note to the otherwise plain route marker. The layout is simple and symmetrical, so the sign reads clearly even at a small size.

Meaning & Symbolism

PSH stands for Primary State Highway, the category of major state roads in Washington used from 1937 until the statewide renumbering of 1964. Route 21 was one of those designations, and the shield was the marker drivers used to identify it. Many former PSH 21 segments were later folded into modern State Routes such as SR 3, SR 104 and SR 106, depending on their location. The sign therefore records a stage in the state's road administration, before the current numbering system took over.

On the Sticker Surface

A kiss-cut sticker is cut around the edge of its artwork, so the shield keeps its own outline once it is peeled from the backing and set on a surface. Its glossy finish gives the black and white contrast a crisp, sign-like look. The sticker suits smooth flat surfaces such as a laptop lid, a journal cover or a window, and it is best suited to indoor decor, as the product facts note that it is not waterproof.

View full details
Collection
Road Sign · Washington
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →