Skip to product information
1 of 12

Serbia

Serbian Anarchists flag

Serbian Anarchists flag

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
Finish

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Serbian Anarchists flag (Serbia) STICKER Vinyl Kiss-Cut Decal

This design is a flat, bold composition that fuses the black field and circled-A of anarchism with the red, blue and white of Serbia.

Visual Elements & Composition

Solid black dominates the design, taking roughly half the field and setting the tone before anything else registers. Red, blue and white share the remaining space as a tricolour band, with the stark black against the three national hues producing a hard, high-contrast look. The layout is built from simple rectangles and a triangle, and a single five-pointed star sits within the composition. The rendering is flat vector, with clean edges and no gradients or texture, so each colour block reads clearly at a glance.

Meaning & Symbolism

The black field stands for anarchism's rejection of the state, and the circled-A is the movement's universal emblem. The red, blue and white are the traditional colours of Serbia, so placing them beside the black marks a regional anarchist identity. There is no official national flag for Serbian anarchists; designs like this one came out of informal use by activists and individuals who combined global anarchist symbols with local identifiers. The result addresses the absence of a state, regional autonomy, and the meeting point between the international anarchist movement and Serbian culture.

On the Kiss-Cut Sticker

A kiss-cut sticker is cut to the outline of its artwork, so the black field and the star are seen as shapes in their own right, with nothing around them but the surface they are applied to. Because the design is built from hard-edged blocks, the cut line itself becomes part of the composition. It is a piece meant to be read up close, where the colour blocks and the star resolve clearly.

View full details

About this design

Serbian Anarchists flag

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Serbia
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →