Skip to product information
1 of 12

Road Sign · California

Santa Clara County G21

Santa Clara County G21

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Santa Clara County G21 (California) (Road Sign) STICKER Vinyl Kiss-Cut Decal

A flat navy-and-gold county route shield reading SANTA CLARA COUNTY G21, the marker used for the Capitol Expressway corridor in San Jose.

Visual Elements & Composition

The design is built almost entirely from deep navy blue, which covers roughly four-fifths of the surface. Golden yellow appears as the lettering and the accent band, giving the sign its high-contrast civic look. The pentagonal shield sits centred with a double-line border running around its edge, and the words SANTA CLARA and COUNTY sit above and below the large G21 numeral. The rendering is flat vector with no shading, so every edge stays crisp and the layout reads at a glance.

Meaning & Symbolism

In the California county route system, the letter G marks the zone assigned to this region, and the number identifies this particular road. The shield is the standard navigational marker, a symbol of how the state organises its roadway hierarchy. The G21 designation belongs to the Capitol Expressway, which runs from its interchange with State Route 87 to a termination near Interstate 680 and Jackson Avenue in East San Jose. The route was formally defined in 1978, and its eastern segment was completed in 1997.

On the Kiss-Cut Sticker

A kiss-cut sticker follows the outline of its artwork while the backing stays whole, so the pentagonal shield becomes the shape of the sticker itself. The sign is recognisable from its silhouette alone, which suits a piece that is meant to be seen at a glance. It works best on indoor surfaces such as a laptop lid, a notebook or a bedroom door, where the crisp navy and gold can stand out.

View full details
Collection
Road Sign · California
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →