Skip to product information
1 of 18

Road Sign · Angola

SADC road sign R127-POR

SADC road sign R127-POR

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

SADC road sign R127-POR (Angola) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces the Angolan R127 road sign, a regulatory marking that reserves a route for abnormal vehicles only.

Visual Elements & Composition

The sign follows standardized traffic signaling protocols, built on a high-contrast palette and clear typography that read instantly at a distance. The regulation code R127 and the notation POR sit at the centre of the composition, giving the eye a single point to land on. Every element is placed for immediate recognition and functional clarity, with nothing decorative added to the layout.

Meaning & Symbolism

Within the Southern African Development Community Road Traffic Signs Manual (SADC-RTSM), R127 instructs that the area or route is designated for abnormal vehicles. The permission applies specifically to oversized loads and vehicles with abnormal dimensions, so the sign works as a gate: it tells drivers of standard vehicles that this road is not theirs. Its message is strictly informational, tied to transport logistics and regional road safety across Angola and the wider SADC region.

Shaped to the Sign's Own Outline

A kiss-cut sticker is cut along the edge of its artwork, so this reproduction carries the sign's own silhouette onto whatever surface it joins. Stuck to a laptop lid, a journal cover or a window, it reads as a single signal rather than a rectangle with a picture on it. For collectors of regional signage, it is a clean, factual piece of infrastructure in miniature.

View full details

About this design

SADC road sign R127-POR

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Angola
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
8 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →