Skip to product information
1 of 18

Road Sign · Norway

Norwegian-road-sign-314.0 blank

Norwegian-road-sign-314.0 blank

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Norwegian-road-sign-314.0 blank (Norway) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces Norwegian road sign 314.0, the blank height limit sign that tells drivers a vehicle or load taller than the figure shown may not pass beyond it.

Visual Elements & Composition

The sign is built on the standard Norwegian traffic language: a white field, a red circular border, and black detailing set against that ground. The layout is strictly functional. The red ring dominates the outline, and the interior stays open and uncluttered, so the sign reads at a glance. Because the numerals are left blank, the centre is a clean white space where the design's minimalism does the work, and the eye lands on the shape and colour before anything else.

Meaning & Symbolism

Sign 314 is the height limit, known in Norway as høydegrense, under the regulations of Statens vegvesen, the Norwegian Public Roads Administration. Its red circle is the universal prohibition signal: it forbids vehicles and cargo that exceed the height indicated from continuing through the area it governs. The blank version presents the sign in its pure form, the bare rule before any specific measurement is applied. It stands for road safety and the orderly, legible infrastructure that defines Scandinavian transit design.

Why It Suits a Sticker

A road sign is a closed circle, and this kiss-cut sticker follows that outline exactly, so the artwork is seen as a single bold shape rather than a rectangle with a sign inside it. Its compact, flat form suits placements where a sign-like graphic reads as a deliberate statement, such as a toolbox lid, a notebook cover, or a laptop lid. Each piece lifts the sign off the road and onto something personal, giving a Norwegian traffic classic a place in everyday life.

View full details

About this design

Norwegian-road-sign-314.0 blank

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Norway
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
8 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →