What sizes are available for this Holographic Die-Cut Decals?

Die-cut decals are available in five sizes. Each size is measured by the longest side of the decal. The precision die-cut technique creates crisp edges that follow your artwork's exact contour for a professional finish.

What material is this Holographic Die-Cut Decals made from?

Die-cut decals are made from premium water-resistant vinyl engineered for weather resistance. They're finished with a matte UV laminate that protects against sun exposure, reduces glare, and guards against scratches. Eco-solvent inks provide dense, even color that stays vibrant through outdoor exposure.

Is this Holographic Die-Cut Decals waterproof and suitable for outdoor use?

Yes, die-cut decals are water-resistant and built to withstand sun, rain, and everyday outdoor wear. They're rated for multi-year outdoor life when applied to smooth, non-porous surfaces like glass, metal, and coated plastics. The matte UV laminate provides additional protection against fading.

How do I apply or install this Holographic Die-Cut Decals?

First, prep the surface by removing dust and oils with a lint-free cloth. For stubborn residue, use mild soap and water and allow to dry fully. Peel and position the decal, laying it down slowly while pressing from the center outward. Use a card or squeegee to smooth the edges and ensure full contact.

How do I care for and clean this Holographic Die-Cut Decals?

Maintenance is simple. Gently wipe the surface with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp microfiber cloth with light pressure, then dry immediately afterward. Avoid abrasive pads, strong solvents, or power washers as these can scratch the laminate or lift edges.

What surfaces work best for this Holographic Die-Cut Decals?

Die-cut decals adhere best to smooth, non-porous surfaces including glass, metal, coated plastics, and finished wood. They work excellently on bottles, windows, laptops, and vehicle windows. To ensure optimal performance in wet conditions, apply to very smooth surfaces where the adhesive can form a full bond. Avoid rough or heavily textured materials.

How long will this Holographic Die-Cut Decals last?

Die-cut decals are rated to last multiple years outdoors under normal conditions when properly applied to suitable surfaces. The water-resistant vinyl with UV laminate is engineered to withstand regular sun, rain, and temperature fluctuations. Actual longevity depends on exposure levels, surface preparation, and local weather conditions.

1 9

Showing Holographic · 1 view

U.S. Army

MEDDAC Sierra Depot

Holographic die-cut decal that shifts rainbow when it catches the light. Also comes in 2 other finishes.

$6.49 USD

Sale Sold out

$5.51 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.

Sticker type Same design, 3 ways

SizeMeasured on the longest side 2 Inch$6.49 3 Inch$7.49 4 Inch$8.49 5 Inch$9.49 6 Inch$9.99

Finish Holographic

2 Inch on a 13" laptop palm rest

2 Inch on a 24 oz bottle

Quantity

2+ save 15%
5+ save 20%
10+ save 25%
50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

Outdoor-ready vinylUV-laminated, water resistant, cut to the shape.
Printed to orderMade in the USA when you order, not pulled off a shelf.
Free U.S. shippingOn orders over $25.

MEDDAC Sierra Depot (U.S. Army) Holographic STICKER Die-Cut Vinyl Decal

A maroon shield crest with two crossed gold keys, a white Maltese cross and a sunburst rising over mountain peaks.

Visual Elements & Composition

Maroon and gold yellow dominate the crest, with white used sparingly for the Maltese cross. The two crossed keys sit across the shield's face, and a rayed sunburst fans out above the mountain peaks. A curved banner at the base carries the words PLEDGED TO SERVE in dark lettering. The shield shape and rayed top give the layout a formal, balanced structure.

Meaning & Symbolism

The crest is the emblem of the Medical Department Activity at Sierra Army Depot, a U.S. Army installation. Crossed keys stand for custody and trust, the Maltese cross for the medical service, and the sunburst over the peaks for the installation's setting. The banner's motto, PLEDGED TO SERVE, names the purpose the crest was made to express.

Cut to the Shield Outline

A die-cut sticker follows the shield's outline, so the sticker's edge is the crest's own silhouette. The gold keys and white cross read clearly at small size, which suits a laptop, notebook or journal where the crest can be looked at up close.

View full details

About this design

MEDDAC Sierra Depot

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection: U.S. Army
Comes on: 3 sticker types
Price: $6.49 – $9.99
Sizes: 5 options

Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.

Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.

Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.

Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.

Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.

Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.

Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.

Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.

Which one do I need?

Pick by where it's going.

Indoors & smooth

Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.
LaptopJournalPhone caseMirror
Kiss-cuts →
Outdoors & wet

Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.
Water bottleCoolerBumperHard hat
Die-cuts →
Behind glass

Window (reverse-print): sticks to the inside of a window and reads correctly from outside.
Car windowShop doorDorm window
Window decals →

Country/region

MEDDAC Sierra Depot

MEDDAC Sierra Depot

MEDDAC Sierra Depot (U.S. Army) Holographic STICKER Die-Cut Vinyl Decal

Visual Elements & Composition

Meaning & Symbolism

Cut to the Shield Outline

MEDDAC Sierra Depot

Pick by where it's going.

Indoors & smooth

Outdoors & wet

Behind glass