What sizes are available for this Holographic Die-Cut Decals?

Die-cut decals are available in five sizes. Each size is measured by the longest side of the decal. The precision die-cut technique creates crisp edges that follow your artwork's exact contour for a professional finish.

What material is this Holographic Die-Cut Decals made from?

Die-cut decals are made from premium water-resistant vinyl engineered for weather resistance. They're finished with a matte UV laminate that protects against sun exposure, reduces glare, and guards against scratches. Eco-solvent inks provide dense, even color that stays vibrant through outdoor exposure.

Is this Holographic Die-Cut Decals waterproof and suitable for outdoor use?

Yes, die-cut decals are water-resistant and built to withstand sun, rain, and everyday outdoor wear. They're rated for multi-year outdoor life when applied to smooth, non-porous surfaces like glass, metal, and coated plastics. The matte UV laminate provides additional protection against fading.

How do I apply or install this Holographic Die-Cut Decals?

First, prep the surface by removing dust and oils with a lint-free cloth. For stubborn residue, use mild soap and water and allow to dry fully. Peel and position the decal, laying it down slowly while pressing from the center outward. Use a card or squeegee to smooth the edges and ensure full contact.

How do I care for and clean this Holographic Die-Cut Decals?

Maintenance is simple. Gently wipe the surface with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp microfiber cloth with light pressure, then dry immediately afterward. Avoid abrasive pads, strong solvents, or power washers as these can scratch the laminate or lift edges.

What surfaces work best for this Holographic Die-Cut Decals?

Die-cut decals adhere best to smooth, non-porous surfaces including glass, metal, coated plastics, and finished wood. They work excellently on bottles, windows, laptops, and vehicle windows. To ensure optimal performance in wet conditions, apply to very smooth surfaces where the adhesive can form a full bond. Avoid rough or heavily textured materials.

How long will this Holographic Die-Cut Decals last?

Die-cut decals are rated to last multiple years outdoors under normal conditions when properly applied to suitable surfaces. The water-resistant vinyl with UV laminate is engineered to withstand regular sun, rain, and temperature fluctuations. Actual longevity depends on exposure levels, surface preparation, and local weather conditions.

Home / Holographic Die-Cut Decals / Marine Aircraft Group 36 (USMC) Holographic STICKER Die-Cut Vinyl Decal

1 9

Marine Aircraft Group 36 (USMC) Holographic STICKER Die-Cut Vinyl Decal

$6.49 USD

Sale Sold out

Shipping calculated at checkout.

Marine Aircraft Group 36 (USMC) Holographic Sticker - Design Description

Visual Overview

This holographic sticker presents a striking visual representation of Marine Aircraft Group 36 (MAG-36). The design is rendered in a die-cut format, allowing the shape of the artwork to stand out with precision. The holographic finish adds a dynamic and eye-catching quality, shifting colors and highlights as the sticker is viewed from different angles.

Design Elements and Symbolism

The core of the design likely features imagery associated with MAG-36's mission and aircraft. This could include a silhouette or detailed depiction of a CH-53E Super Stallion helicopter, an MV-22B Osprey, or both, immediately signaling the unit's aerial capabilities. The inclusion of these aircraft underscores the group's heavy-lift and rapid-deployment roles within the Marine Corps.

The presence of the USMC Eagle, Globe, and Anchor emblem would further ground the design, clearly identifying the affiliation with the United States Marine Corps. The design is likely to incorporate elements representing MAG-36's operational environment, possibly including clouds, terrain, or a stylized depiction of an amphibious landing to symbolize the Marine Corps' sea-to-land projection capabilities.

The use of a die-cut format enhances the design's visual impact, allowing the shape of the aircraft or emblem to be the central focus, framed by the dynamic effect of the holographic finish. The design therefore celebrates the aerial capabilities and dedicated service of the Marines within MAG-36.

Size 2 Inch 3 Inch 4 Inch 5 Inch 6 Inch

Surface Holographic

Quantity

Bulk Discounts Available

These discounts apply to all Holographic Decals.

Buy 2+

20% OFF

Buy 5+

30% OFF

Buy 10+

40% OFF

Buy 50+

50% OFF

Automatically applied at checkout.

Also Found In:

View full details

Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.

Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.

Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.

Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.

Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.

Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.

Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.

Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.

Country/region

Marine Aircraft Group 36 (USMC) Holographic STICKER Die-Cut Vinyl Decal