Skip to product information
1 of 18

Road Sign · Malaysia

Malaysia road sign RM1e

Malaysia road sign RM1e

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Malaysia road sign RM1e (Malaysia) (Road Sign) STICKER Vinyl Kiss-Cut Decal

A flat, minimalist road sign in dark blue and white, built around a single instruction: proceed straight ahead or turn right.

Visual Elements & Composition

A solid dark blue circle fills most of the frame and carries the entire design. Inside it, a white pictogram of arrows does the work: a shaft rises from the lower centre, then branches into an upward arrowhead for straight ahead and a right-pointing arrowhead for the turn. The composition is centred and uncluttered, with no lettering or numerals, so the shape reads at a glance. Blue covers roughly 60 percent of the image and white the rest, a split that keeps the contrast hard and the message clear.

Meaning & Symbolism

The RM1e belongs to the standardised road signage system used by government and public works road authorities in Malaysia. It is classified as a Tanda Wajib, a mandatory instruction sign. The blue circle marks the directive as binding, and the white arrows set out the permitted paths for motorists, who are required to follow them. The sign is part of the regulatory catalogue that organises traffic flow across the country, and it remains in active use on Malaysian roads today. Its plain geometry reflects the clarity that traffic control demands.

Why This Artwork Suits a Kiss-Cut Sticker

A kiss-cut sticker is trimmed to its own outline, and this design is a circle with arrows inside, so the cut follows the sign's edge exactly. The result is a standalone roundel with no border or background to frame it. Its bold, two-colour silhouette holds up at small scale, which makes it a compact piece for collectors of road signage and anyone who enjoys transport graphics.

View full details

About this design

Malaysia road sign RM1e

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Malaysia
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
8 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →