Skip to product information
1 of 18

Road Sign · Lithuania

Lithuania road sign 317

Lithuania road sign 317

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Lithuania road sign 317 (Lithuania) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces Road Sign 317 from the Republic of Lithuania, a width-restriction sign that tells drivers the road ahead cannot take vehicles wider than the figure printed in its centre.

Visual Elements & Composition

The sign is a flat vector circle built on three colours. White fills most of the field, red forms a bold annulus around the edge, and black carries the numerals and the inward-pointing arrowheads. The red ring dominates the eye first, and the black figures sit in the open white centre, where the value reads at a glance: 4,5 m. Nothing decorative competes with the message, so the composition is as stripped back as the sign itself.

Meaning & Symbolism

Sign 317 belongs to the prohibitory category of the national Road Traffic Rules, and it follows the European convention for road signage. The red circle is the shared visual language of prohibition across the continent, and the number is a legal limit: a maximum width of 4.5 metres. The black arrowheads point inward, toward the centre of the roadway, reinforcing the instruction. The sign marks a physical constraint such as a narrow bridge or an urban passage, and it asks drivers to divert if their vehicle, including any load, exceeds the stated width. It is a small piece of civil engineering that works as a rule of law.

Cut to Its Own Outline

A road sign is defined by its circle, and this sticker follows that outline exactly. The kiss-cut shape means the red ring becomes the sticker's edge, so the object reads as a sign rather than a rectangle with a sign printed on it. Its flat, high-contrast face suits a collector who wants a clean piece of transport graphics, and it suits anyone who appreciates signage as a form of design.

View full details
Collection
Road Sign · Lithuania
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →