Skip to product information
1 of 18

Road Sign · Latvia

Latvia road sign 407

Latvia road sign 407

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Latvia road sign 407 (Latvia) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces Latvian road sign 407, a mandatory instruction that tells drivers they must turn right, rendered as a precise, high-contrast traffic symbol.

Visual Elements & Composition

The composition is built on the clean geometry of transport iconography. Blue and white dominate the palette, the two colours the design metadata identifies, arranged with the high contrast that lets a sign read instantly at a glance. The layout is minimal: a single directional figure and no decorative clutter, so the functional shape carries the whole image. The sign's numeral, 407, anchors the design as the identifier of this specific regulatory sign.

Meaning & Symbolism

Sign 407 carries the instruction Braukt pa labi, meaning "Turn right." Under Latvian road traffic rules, it is a mandatory sign, so the arrow is a command rather than a suggestion. The design is governed by Cabinet Regulation No. 279, Latvia's Road Traffic Regulations, which set the standard for its form and colour. For collectors of national road signage, it is a compact record of how Latvia communicates a rule to a driver in a single glance.

Built for a Cut-to-Shape Sticker

A kiss-cut sticker follows its own outline, and a road sign is already defined by its shape. The circular silhouette and bold directional mark survive the cut intact, so the sticker reads as a sign rather than a rectangle with a picture on it. Place it on a laptop lid, a notebook cover or a travel case where a single clear symbol earns a second look from anyone who knows what it means.

View full details

About this design

Latvia road sign 407

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Latvia
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
8 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →