Skip to product information
1 of 18

Road Sign · Latvia

Latvia road sign 302

Latvia road sign 302

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Latvia road sign 302 (Latvia) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces Latvian road sign 302, a formal regulatory symbol that tells every driver in its path that the road ahead is closed to vehicles.

Visual Elements & Composition

The palette is limited to red, white and black. Red does the signalling, white forms the open field, and black supplies the sharp contrast that carries the message at a glance. The composition is minimalist: one dominant symbol, no decorative clutter, and nothing that competes with the core instruction. That restraint is deliberate, because a regulatory sign has to be read in a moving vehicle in a fraction of a second.

Meaning & Symbolism

The sign carries the instruction Braukt aizliegts, meaning "Road closed to all vehicles in both directions." It prohibits all vehicles from entering the designated area, with set exceptions for public transport, taxis, vehicles used by persons with disabilities, and vehicles belonging to residents or workers within the zone. The sign is governed by the Latvian Road Traffic Regulations (Ceļu satiksmes noteikumi) and the national standards LVS 77-1, 77-2 and 77-3, which align with the 1968 Vienna Convention on Road Signs and Signals. The design belongs to the wider visual language of European traffic control, where shape and colour carry meaning before any word is read.

Cut to the Sign's Own Edge

Kiss-cut stickers are trimmed to the shape of the artwork and leave the backing intact, so the sign arrives as a single image rather than a square with a symbol on it. Road signs are read as objects in their own right, and this format keeps that quality. Its bold red, white and black composition suits a small, close-up surface where the viewer looks at it up close, such as a notebook, a laptop lid or a case. It works best for collectors of Latvian road signage and for anyone drawn to the sharp graphic language of traffic regulation.

View full details
Collection
Road Sign · Latvia
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →