What sizes are available for this Holographic Die-Cut Decals?

Die-cut decals are available in five sizes. Each size is measured by the longest side of the decal. The precision die-cut technique creates crisp edges that follow your artwork's exact contour for a professional finish.

What material is this Holographic Die-Cut Decals made from?

Die-cut decals are made from premium water-resistant vinyl engineered for weather resistance. They're finished with a matte UV laminate that protects against sun exposure, reduces glare, and guards against scratches. Eco-solvent inks provide dense, even color that stays vibrant through outdoor exposure.

Is this Holographic Die-Cut Decals waterproof and suitable for outdoor use?

Yes, die-cut decals are water-resistant and built to withstand sun, rain, and everyday outdoor wear. They're rated for multi-year outdoor life when applied to smooth, non-porous surfaces like glass, metal, and coated plastics. The matte UV laminate provides additional protection against fading.

How do I apply or install this Holographic Die-Cut Decals?

First, prep the surface by removing dust and oils with a lint-free cloth. For stubborn residue, use mild soap and water and allow to dry fully. Peel and position the decal, laying it down slowly while pressing from the center outward. Use a card or squeegee to smooth the edges and ensure full contact.

How do I care for and clean this Holographic Die-Cut Decals?

Maintenance is simple. Gently wipe the surface with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp microfiber cloth with light pressure, then dry immediately afterward. Avoid abrasive pads, strong solvents, or power washers as these can scratch the laminate or lift edges.

What surfaces work best for this Holographic Die-Cut Decals?

Die-cut decals adhere best to smooth, non-porous surfaces including glass, metal, coated plastics, and finished wood. They work excellently on bottles, windows, laptops, and vehicle windows. To ensure optimal performance in wet conditions, apply to very smooth surfaces where the adhesive can form a full bond. Avoid rough or heavily textured materials.

How long will this Holographic Die-Cut Decals last?

Die-cut decals are rated to last multiple years outdoors under normal conditions when properly applied to suitable surfaces. The water-resistant vinyl with UV laminate is engineered to withstand regular sun, rain, and temperature fluctuations. Actual longevity depends on exposure levels, surface preparation, and local weather conditions.

Home / HMLA - Marine Helicopter Squadron Decals & Stickers / HMLA 467 (USMC) Holographic STICKER Die-Cut Vinyl Decal

1 9

HMLA 467 (USMC) Holographic STICKER Die-Cut Vinyl Decal

$6.49 USD

Sale Sold out

Shipping calculated at checkout.

HMLA 467 (USMC) Holographic Die-Cut Vinyl Decal Design

This striking decal design pays homage to Marine Light Attack Helicopter Squadron 467 (HMLA-467), a United States Marine Corps (USMC) unit. The holographic finish adds a dynamic, eye-catching element that reflects light and creates an illusion of depth, adding a modern and dynamic flair.

Artwork & Symbols

The design prominently features the squadron's designation, "HMLA-467", rendered in a bold, military-inspired font, immediately identifying the unit. The stylized depiction of the unit's aircraft— the AH-1W Super Cobra attack helicopter and the UH-1Y Venom utility helicopter— is a visual representation of the squadron's combined attack and support capabilities. These aircraft silhouettes likely appear with accurate details, showing off the iconic lines of these helicopters. The inclusion of these aircraft represents the unit's ability to deliver offensive air support and utility missions.

Meaning & Representation

The design’s overall aesthetic is a tribute to the legacy of HMLA-467. The visual representation of the aircraft within the squadron emphasizes the unit's role in supporting Marine ground forces, while the holographic effect adds a dynamic and modern touch, making this decal not only a representation of the unit, but also a statement of pride. The decal embodies the squadron's history of service and its integral role in Marine Corps aviation.

Size 2 Inch 3 Inch 4 Inch 5 Inch 6 Inch

Surface Holographic

Quantity

Bulk Discounts Available

These discounts apply to all Holographic Decals.

Buy 2+

20% OFF

Buy 5+

30% OFF

Buy 10+

40% OFF

Buy 50+

50% OFF

Automatically applied at checkout.

Also Found In:

View full details

Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.

Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.

Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.

Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.

Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.

Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.

Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.

Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.

Country/region

HMLA 467 (USMC) Holographic STICKER Die-Cut Vinyl Decal