Skip to product information
1 of 9

U.S. Army

Dental Laboratory Fort Sam Houston

Dental Laboratory Fort Sam Houston

Holographic die-cut decal that shifts rainbow when it catches the light.

Regular price $6.49 USD
Regular price Sale price $6.49 USD
Sale Sold out

$5.51 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
Finish

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Outdoor-ready vinylUV-laminated, water resistant, cut to the shape.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Dental Laboratory Fort Sam Houston (U.S. Army) Holographic STICKER Die-Cut Vinyl Decal

This design reproduces the Distinctive Unit Insignia of the US Army Area Dental Laboratory, a heraldic crest built around a central cross and framed by a winged emblem and a motto scroll.

Visual Elements & Composition

Gold dominates the composition, filling most of the field, while deep maroon anchors the central figures. An inverted gold triangle sits behind a maroon tri-lobed shape, and a caduceus-style winged emblem rises across the crest. A globe lattice adds fine linework to the lower structure, and a scroll banner carries the motto. The layout is symmetrical and stacked, with each element sitting in a clear tier so the silhouette reads at a glance.

Meaning & Symbolism

The central cross surrounded by smaller crosses represents the unit's provision of both basic and specialized dental services. The maroon and white palette comes from the official colors of the US Army Dental Corps, and the motto, To Restore Anew, names the unit's purpose in three words. The insignia was established on December 8, 1981, for a unit that was one of four regional activities providing laboratory support under the US Army Medical Command. The Fort Sam Houston location operated until its closure on October 1, 1997, so the crest records a specific sixteen-year chapter of Army medical history.

Designed for the Die-Cut Edge

A die-cut sticker takes the outline of the crest itself, so the inverted triangle, the wings and the scroll define the shape you see on the surface. The holographic finish catches light across the gold areas, giving the heraldry a metallic shimmer that suits a crest meant to be looked at closely. Place it where the eye lands at close range, such as a laptop lid, a notebook cover or a toolbox, where the full outline can be appreciated.

View full details

About this design

Dental Laboratory Fort Sam Houston

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
U.S. Army
Comes on
1 sticker type
Price
$6.49 – $9.99
Sizes
5 options

Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.

Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.

  • Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
  • Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
  • Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
  • Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
  • Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.

Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.

  1. Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
  2. Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
  3. Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.

Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.

  • Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
  • Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
  • If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.

Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →