Skip to product information
1 of 10

Road Sign · Connecticut

Connecticut Highway 75

Connecticut Highway 75

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Connecticut Highway 75 (Connecticut) (Road Sign) STICKER Vinyl Kiss-Cut Decal

A plain white square carrying the black numeral 75, the designation of a Connecticut highway.

Visual Elements & Composition

White covers most of the design, with a single black numeral 75 set at the centre of a square. Nothing else competes with the figure, so the two digits carry the whole composition. The graphic is flat, sharp-edged and spare.

Meaning & Symbolism

A route number tells a traveller which road they are on, and this one marks a numbered route within the state of Connecticut. The design is a compact tribute to that piece of local transport and to the map of the state. It reads as an identifier first and an image second.

On the Kiss-Cut Sticker

The kiss-cut follows the outline of the square and leaves the backing intact, so the square's edge becomes the sticker's own shape. The vinyl suits flat, smooth surfaces such as a laptop lid, a journal or an indoor window, where the numeral reads at a glance. The black and white pairing keeps it crisp on a desk or a notebook.

View full details
Collection
Road Sign · Connecticut
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →