Skip to product information
1 of 18

Road Sign · Switzerland

CH-Vortrittssignal-Einfaches Andreaskreuz 2

CH-Vortrittssignal-Einfaches Andreaskreuz 2

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

CH-Vortrittssignal-Einfaches Andreaskreuz 2 (Switzerland) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design renders the Swiss Einfaches Andreaskreuz, a priority signal built around a single bold saltire, the diagonal cross that Swiss road and rail users read at a glance.

Visual Elements & Composition

A saltire, two diagonal bars crossing at the centre, fills the frame in a strictly symmetrical layout. The palette is high-contrast red and white, the pairing chosen so the mark registers instantly against any background. Nothing competes with the cross: no border clutter, no lettering, no numerals. Every line is set at the same angle and weight, so the eye settles on the centre point and stays there.

Meaning & Symbolism

The saltire is commonly known as the St. Andrew's Cross, and in Swiss traffic and railway signage it marks a priority situation that demands attention before anything else. Its geometry carries the message: balanced, ordered, and firm, a sign of authority paired with caution. The red and white scheme follows the same logic, since high-contrast colour is what makes a warning legible from a distance and under changing light. The design belongs to the wider family of European infrastructure signage, where a shape alone communicates the rule.

Built to the Outline of the Cross

A kiss-cut sticker follows the artwork's own edge, so the saltire itself becomes the object. There is no backing rectangle to frame it, only the cross, which suits a design whose whole identity lives in its silhouette. Place it where a single clear mark belongs: a laptop lid, a notebook cover, a toolbox, or the inside of a door that a fellow road-sign fan will spot on the first look.

View full details

About this design

CH-Vortrittssignal-Einfaches Andreaskreuz 2

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Switzerland
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
8 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →