Skip to product information
1 of 18

Road Sign · Canada

CA-QC road sign I-385

CA-QC road sign I-385

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

CA-QC road sign I-385 (Canada) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces a Quebec provincial highway sign marking Route I-385 in Canada, rendered as a clean, flat graphic that reads at a glance.

Visual Elements & Composition

Green fills roughly four-fifths of the frame, with white carrying most of the remaining detail and a small amount of black providing the sharpest edges. The layout follows a vertical rectangular sign with rounded corners. Its primary content is the route identifier and a set of pictograms: a walking pedestrian, a hand pressing a push plate, and three arrows pointing up, diagonally up-left, and left. Every element is drawn in flat vector shapes with no gradients or texture, so the contrast between the green field and white symbols does the work.

Meaning & Symbolism

The sign belongs to the wayfinding language used across North American roads, where a single colour field, a route number and simple arrows direct a driver or pedestrian without words. The pedestrian and push-plate pictograms signal crossing and waiting, while the arrows indicate direction of travel. Together they describe how a route is navigated, not just where it goes. The I-385 designation ties the artwork to the transport network of Quebec and to the everyday geography of Canadian travel.

Built to the Shape of the Sign

A kiss-cut sticker is trimmed to its own outline, and here that outline is the rounded silhouette of the sign itself. The cut follows the green edge, so the artwork is read as a single object rather than a rectangle with a sign printed on it. Placed on a laptop, a notebook or a window, the sticker carries the boundary of a roadside marker onto a surface that is held and looked at up close.

View full details

About this design

CA-QC road sign I-385

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Canada
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
8 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →