Skip to product information
1 of 13

Road Sign · Arizona

Arizona 93

Arizona 93

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
Finish

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Arizona 93 (Arizona) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design renders a historical Arizona 93 highway shield as a bold, flat black-and-white route marker, the kind that once guided drivers across the state's northern desert and mountain country.

Visual Elements & Composition

Black and white split the artwork almost evenly, with white at roughly 60 percent and black at 40 percent. The shield is a square with its top-left and bottom-left corners clipped, sitting inside a rounded-corner square badge. The word ARIZONA runs across the upper field, and the numeral 93 dominates the lower field in heavy, centred figures. Nothing competes with those two lines of text, so the composition reads instantly at a glance.

Meaning & Symbolism

The shield is the visual language of the state highway system: a compact sign that tells a driver which route they are on. Arizona State Route 93 was a state highway designation that connected smaller towns to major roads through remote desert and mountainous terrain. The route no longer carries that number, having been largely replaced by or folded into U.S. Route 93, which makes the sign a record of an earlier era of travel in the American West. Highway enthusiasts and collectors value these markers as physical traces of road infrastructure that has since changed.

On the Sticker

A road sign is built around a silhouette, and this kiss-cut sticker follows that outline exactly, so the shield's clipped corners are the edge of the object itself. Set against a flat surface, the artwork reads as a single marker rather than a rectangle with a picture on it, which suits a design made to be seen up close and read in one look.

View full details

About this design

Arizona 93

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Arizona
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →