Skip to product information
1 of 12

Road Sign · Arizona

Arizona 89L

Arizona 89L

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
Finish

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Arizona 89L (Arizona) (Road Sign) STICKER Vinyl Kiss-Cut Decal

This design reproduces the highway signage for Arizona State Route 89L, a short connector branching off the main State Route 89, drawn as a clean flat-vector road sign.

Visual Elements & Composition

The artwork is built in two colours, black and white, with white taking the larger share of the frame at roughly 60 percent. The word ARIZONA sits across the top in the standard sign lettering, and the route marker below it is the focal point: the numerals 89L set inside a rounded-corner rectangular badge. The shield's outline has clipped top-left and bottom-left corners, a sharp, angular profile that reads instantly as a route marker. Nothing else competes for attention. The layout is minimal, with each element given its own space and no decorative detail beyond the sign itself.

Meaning & Symbolism

Arizona's lettered routes, such as the suffix L, mark local connectors, business loops, and alternate paths. They link nearby towns and points of interest back to the primary highway corridor. The L beside the number is what separates this route from the main State Route 89 it branches from. Because lettered routes are short and often left off standard maps, a sign like this points to the overlooked part of the state's road network, the secondary roads that carry local traffic between the major highways.

Cut to the Sign's Own Outline

A kiss-cut sticker follows the artwork's edge, so the clipped corners and rounded badge of the AZ 89L shield become the sticker's silhouette. The shape of the route marker is what the eye sees first, with no border or backing shape around it. For collectors of Arizona road signage, or anyone who has driven the state's back routes, the cut shape matches the sign it depicts.

View full details

About this design

Arizona 89L

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Arizona
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →