Skip to product information
1 of 12

Russia

Altai Republic flag submission 1992 21

Altai Republic flag submission 1992 21

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Altai Republic flag submission 1992 21 (Russia) STICKER Vinyl Kiss-Cut Decal

A 1992 design submission for the flag of the Altai Republic, built on white and blue stripes with a circular emblem of abstract symbols.

Visual Elements & Composition

White covers about half of the field, with blue as the second dominant tone and small areas of green and red in the emblem. The stripes run on a diagonal across the rectangular field, which gives the design its movement. A circular emblem holding abstract symbols sits within the composition, and the palette is clean and flat, with no lettering. The result is a bright, open graphic in which the stripes and the roundel share the work of the layout.

Meaning & Symbolism

This is a historical submission by the designer Gennady Kebekov, prepared in 1992 during the period when the Altai Republic was shaping its own identity. The design was one of several proposals considered, and it was not the flag that was adopted. The adopted flag, designed by V. P. Chukuyev, took its meaning from white stripes for eternity, revival, love and consent, and blue stripes for cleanliness, mountains, rivers, lakes and the sky. This submission is a record of the alternative visions that were weighed at that moment.

A Flag Cut to Its Outline

A kiss-cut sticker is trimmed around the outline of the design, so the diagonal stripes and the circular emblem keep their own edges once the backing is removed. On a smooth, flat surface such as a laptop lid, a notebook or a window, the design reads as a crisp, bright mark, and the emblem stays distinct at close range.

View full details
Collection
Russia
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →