Skip to product information
1 of 12

Road Sign · Florida

Alachua County 27

Alachua County 27

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
Finish

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

Alachua County 27 (Florida) (Road Sign) STICKER Vinyl Kiss-Cut Decal

A bold, flat-vector county route marker: a navy pentagonal shield carrying the number 27 and the word COUNTY, set against a golden-yellow nested border.

Visual Elements & Composition

Navy blue dominates the design, covering most of the field, with golden yellow taking up the smaller share in the framing outline. The pentagonal shield sits at the centre, and the nested outline border repeats its geometry inward, so the eye moves from the edge to the numerals without distraction. The large numeral 27 is the focal point, with ALACHUA and COUNTY stacked around it in clean, high-contrast lettering. Nothing decorative competes with the sign itself: the composition reads as a single, immediate symbol.

Meaning & Symbolism

Florida organises its roads into distinct systems: Interstate highways, U.S. Highways, State Roads and County Roads. This marker belongs to the last group. It identifies Route 27 as a numbered, county-maintained road within Alachua County, and the shield shape signals local administrative responsibility rather than a major regional artery. The design is easily confused with U.S. 27, the long north-south highway also known as the Claude Pepper Memorial Highway, which runs through the state. Choosing the county marker means choosing the local network, the smaller routes that carry daily traffic between towns and neighbourhoods. The sign's visual language follows the state's standard signage conventions, which is why it reads instantly to anyone who has driven Florida's back roads.

Shaped to the Signage

A kiss-cut sticker follows its own outline, so the pentagonal shield becomes the sticker's edge rather than a rectangle with a sign printed inside it. The shape carries the design: the cut itself is the road marker, and the sticker reads as a piece of signage applied to whatever surface it lands on. Its small, flat format suits close viewing, where the numerals and the nested border can be seen clearly.

View full details

About this design

Alachua County 27

Every sticker is printed in the USA when you order it, from the artwork shown above.

Collection
Road Sign · Florida
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 options

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Which one do I need?

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →