What sizes are available for this Holographic Die-Cut Decals?

Die-cut decals are available in five sizes. Each size is measured by the longest side of the decal. The precision die-cut technique creates crisp edges that follow your artwork's exact contour for a professional finish.

What material is this Holographic Die-Cut Decals made from?

Die-cut decals are made from premium water-resistant vinyl engineered for weather resistance. They're finished with a matte UV laminate that protects against sun exposure, reduces glare, and guards against scratches. Eco-solvent inks provide dense, even color that stays vibrant through outdoor exposure.

Is this Holographic Die-Cut Decals waterproof and suitable for outdoor use?

Yes, die-cut decals are water-resistant and built to withstand sun, rain, and everyday outdoor wear. They're rated for multi-year outdoor life when applied to smooth, non-porous surfaces like glass, metal, and coated plastics. The matte UV laminate provides additional protection against fading.

How do I apply or install this Holographic Die-Cut Decals?

First, prep the surface by removing dust and oils with a lint-free cloth. For stubborn residue, use mild soap and water and allow to dry fully. Peel and position the decal, laying it down slowly while pressing from the center outward. Use a card or squeegee to smooth the edges and ensure full contact.

How do I care for and clean this Holographic Die-Cut Decals?

Maintenance is simple. Gently wipe the surface with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp microfiber cloth with light pressure, then dry immediately afterward. Avoid abrasive pads, strong solvents, or power washers as these can scratch the laminate or lift edges.

What surfaces work best for this Holographic Die-Cut Decals?

Die-cut decals adhere best to smooth, non-porous surfaces including glass, metal, coated plastics, and finished wood. They work excellently on bottles, windows, laptops, and vehicle windows. To ensure optimal performance in wet conditions, apply to very smooth surfaces where the adhesive can form a full bond. Avoid rough or heavily textured materials.

How long will this Holographic Die-Cut Decals last?

Die-cut decals are rated to last multiple years outdoors under normal conditions when properly applied to suitable surfaces. The water-resistant vinyl with UV laminate is engineered to withstand regular sun, rain, and temperature fluctuations. Actual longevity depends on exposure levels, surface preparation, and local weather conditions.

Home / Holographic Die-Cut Decals / 808th Armament Systems Group (U.S. Air Force) Holographic STICKER Die-Cut Vinyl Decal

1 9

808th Armament Systems Group (U.S. Air Force) Holographic STICKER Die-Cut Vinyl Decal

$6.49 USD

Sale Sold out

Shipping calculated at checkout.

808th Armament Systems Group Holographic Decal Design

This die-cut vinyl decal celebrates the 808th Armament Systems Group of the United States Air Force. The design uses a dynamic holographic effect to create a striking visual representation of the unit's legacy within the Air Force's armament programs.

Visual Elements & Symbolism

The central element of the design is the unit designation: "808th Armament Systems Group" rendered in a bold, military-inspired typeface. This clearly identifies the subject of the decal and emphasizes the unit's official status within the USAF.

The holographic finish is key to the design's impact. The shimmering, iridescent quality of the holographic vinyl is meant to evoke a sense of advanced technology and the cutting-edge weapons systems that the 808th, and similar units, supported. The shifting colors capture a sense of motion and the complex, dynamic nature of armament acquisition and life-cycle support.

The die-cut shape ensures the design stands out, allowing the holographic effect to shine through. This combination of the unit designation, military font, and holographic effect creates a modern and eye-catching tribute to the 808th Armament Systems Group.

Size 2 Inch 3 Inch 4 Inch 5 Inch 6 Inch

Surface Holographic

Quantity

Bulk Discounts Available

These discounts apply to all Holographic Decals.

Buy 2+

20% OFF

Buy 5+

30% OFF

Buy 10+

40% OFF

Buy 50+

50% OFF

Automatically applied at checkout.

Also Found In:

View full details

Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.

Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.

Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.

Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.

Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.

Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.

Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.

Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.

Country/region

808th Armament Systems Group (U.S. Air Force) Holographic STICKER Die-Cut Vinyl Decal