Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.
Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.
- Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
- Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
- Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
- Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
- Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.
Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.
- Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
- Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
- Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.
Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.
- Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
- Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
- If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.
Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.