Skip to product information
1 of 9

19th century Faroese flag 3-2

19th century Faroese flag 3-2

Kiss-cut sticker, glossy vinyl on a square backing sheet.

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out

$2.11 each in a pack of 2+ · mix any sticker types

Shipping calculated at checkout.
SizeMeasured on the longest side
FinishClear lets your surface show through

  • 2+ save 15%
  • 5+ save 20%
  • 10+ save 25%
  • 50+ save 35%

Applied automatically at checkout. Any sticker type counts toward the pack.

  • Indoor glossy vinylLaptops, journals, phone cases, mirrors. Not waterproof.
  • Printed to orderMade in the USA when you order, not pulled off a shelf.
  • Free U.S. shippingOn orders over $25.

19th century Faroese flag 3-2 STICKER Vinyl Kiss-Cut Decal

This is a reproduction of a 19th-century Faroese banner in a 3:2 proportion, with a ram at its centre on a red and blue field.

Visual Elements & Composition

The banner is a flat rectangle built from large fields of red and blue, with grey and a small yellow accent around the central figure. The ram is the only figure, and it sits in the middle of the surface, so the eye goes straight to it. The shapes are simple and the outline is unbroken, which gives the piece the look of a banner carried in an open procession. Red takes the largest share of the surface, with blue as the second field and grey and yellow used sparingly for the ram's detail.

Meaning & Symbolism

These banners were used across the Faroe Islands during the national awakening of the 19th century, at public gatherings and celebrations, before the Faroese national flag, Merkið, was created in 1919. They were never formally adopted, and their meaning rests on the local symbols they carried. The ram, or Veðrur, stands for the islands' heritage, and the tjaldur, the Eurasian oystercatcher, is the national bird that often appeared alongside it. The banner is a record of how an island community asserted its identity before it had a state flag of its own.

Cut to the Outline of the Banner

A kiss-cut sticker keeps its backing whole and is trimmed around the artwork, so the banner can be cut along its own edge and lifted away as one clean form. The flat red and blue fields hold a crisp outline in that shape. Place it on a notebook, a laptop lid or an indoor surface where the banner can be seen up close, and let the ram at its centre carry the design.

View full details
Comes on
1 sticker type
Price
$2.49 – $3.99
Sizes
4 sizes

Glossy kiss-cut vinyl stickers made for smooth, indoor surfaces — laptops, journals, mirrors, and other finished items. Crisp edges, vivid color, strong hold, and not waterproof.

What “kiss-cut” means: the blade cuts the vinyl layer into the exact shape while leaving the backing liner whole, so pieces separate cleanly and lift off the sheet without tearing. It’s the neatest way to produce shaped stickers and multi-piece sheets.

  • Material: reliable vinyl face with a permanent acrylic adhesive formulated for smooth, non-porous surfaces.
  • Finish: glossy surface that enhances contrast and depth without feeling overly reflective.
  • Printing: eco-solvent inks provide dense color and crisp detail for fine lines and gradients.
  • Use case: intended for indoor environments only — not waterproof. Not recommended for continuous exposure to moisture or dishwashing.
  • Application friendly: easy-peel backing and a liner that releases cleanly to help reduce bubbles and misfeeds during placement.

These stickers perform best on smooth, dust-free surfaces — think laptop lids, sealed notebooks, glass, mirrors, finished shelving and lockers. They’ll stick well where the surface is flat and clean; avoid rough wood, silicone, fabric, and heavily textured paint.

  1. Clean: remove dust and oils with a lint-free cloth. For stubborn grime, use a mild soap and water rinse; let the area dry completely.
  2. Align: peel a corner, position carefully, then press the center down first.
  3. Smooth: work outward from the center with a soft card or a thumb to push air out and ensure the edges set down firmly.

Tip: give the adhesive 24 hours to fully settle before heavy handling. These are not designed for outdoor or wet conditions.

  • Gently dust with a soft, dry cloth, moving from the center outward to avoid scratching the gloss.
  • For light marks, a barely damp microfiber will lift residue — blot, don’t scrub, and dry right away.
  • Avoid bleach, solvents, abrasive pads, and steam; moisture or harsh chemicals can lift edges and fade inks.

Reminder: these stickers are not waterproof. Keep them away from sinks, outdoor exposure, and dishwasher cycles to maintain adhesion and finish.

Sizes are measured across the sticker’s longest side. For example, a 3″ sticker is 3 inches across its largest dimension (height or width, depending on the shape).

The kiss-cut follows the sticker’s outline for a tidy border; complex shapes can show small variances, but the advertised measurement refers to the maximum edge-to-edge length.

Pick by where it's going.

  • Indoors & smooth

    Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.

    LaptopJournalPhone caseMirror

    Kiss-cuts →
  • Outdoors & wet

    Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.

    Water bottleCoolerBumperHard hat

    Die-cuts →
  • Behind glass

    Window (reverse-print): sticks to the inside of a window and reads correctly from outside.

    Car windowShop doorDorm window

    Window decals →