Showing Holographic · 6 views
U.S. Air Force
16th Training Squadron
16th Training Squadron
Holographic die-cut decal that shifts rainbow when it catches the light. Also comes in 3 other finishes.
$5.51 each in a pack of 2+ · mix any sticker types
Kiss-cut
$2.49+
Die-cut
$6.49+
Holographic
$6.49+
Window
$8.49+
Couldn't load pickup availability
- 2+ save 15%
- 5+ save 20%
- 10+ save 25%
- 50+ save 35%
Applied automatically at checkout. Any sticker type counts toward the pack.
- Outdoor-ready vinylUV-laminated, water resistant, cut to the shape.
- Printed to orderMade in the USA when you order, not pulled off a shelf.
- Free U.S. shippingOn orders over $25.
16th Training Squadron (U.S. Air Force) Holographic STICKER Die-Cut Vinyl Decal
A flat, modern emblem built around a silver sword rising through red, orange and yellow flames, set inside a royal blue circular badge with the unit name on a ribbon banner across the bottom.
Visual Elements & Composition
Royal blue fills roughly half the design, giving the badge a deep, saturated field that the other colours sit against. The silver sword runs upward through the centre as the single dominant figure, its cool grey tone standing in contrast to the warm flames wrapped around its blade. Red, orange and yellow make up the fire, and the ribbon banner at the bottom carries the text 16TH TRAINING SQUADRON. The layout is symmetrical and uncluttered, with no ornament beyond the badge, sword and banner.
Meaning & Symbolism
The sword and flames are the classic vocabulary of military insignia: the blade stands for readiness and the discipline of the trade, while the flames signal energy and momentum. The circular badge and ribbon banner follow the heraldic conventions of unit crests, placing the numeric designation 16th at the centre of the identity. The design represents the 16th Training Squadron, a unit focused on instruction and skill development, and it reads as a mark of pride for members, veterans and supporters tied to that lineage.
Reading the Sticker's Outline
A die-cut sticker takes the badge's outline as its own shape, so the circle and the banner become the edge of the object rather than a rectangle around it. The sword sits near the centre of that outline, where it is the first thing the eye lands on when the sticker is placed on a laptop lid, notebook or any flat surface a viewer looks down onto. Every ribbon and flame tip is cut to the shape of the emblem, which keeps the crest legible at the scale a sticker is seen at.
About this design
16th Training Squadron
Every sticker is printed in the USA when you order it, from the artwork shown above.
- Collection
- U.S. Air Force
- Comes on
- 4 sticker types
- Price
- $6.49 – $9.99
- Sizes
- 5 options
Holographic vinyl decals with a high-contrast rainbow sheen, printed with eco-friendly inks on premium, weather-rated film. Waterproof, UV-protected, and available in five sizes.
Built to turn heads and hold up outdoors. These holographic decals use premium printable vinyl topped with a UV-protective laminate. The film is rated for multi-year outdoor exposure, so the color stays bold and the surface resists scuffs and sun fade.
- Signature finish: a 99% opaque rainbow effect that shifts with angle and light—clean edges and a smooth, matte-sheen feel rather than a mirror gloss.
- Waterproof: designed for rain, splashes, and regular washing on smooth, non-porous surfaces.
- Eco-conscious printing: vibrant, high-density color produced with eco-solvent inks for sharp lines and rich gradients.
- Color guidance: no white underbase is applied; pure white areas won’t print, and very light tones allow the holographic layer to show through. Darker tones deliver the strongest contrast.
- Easy-peel backing: release liner separates cleanly for quick, bubble-free placement.
Made for smooth surfaces: glass, metal, coated plastics, sealed laptops, bottles, mirrors, lockers, and windows. Suitable for interiors and short-term exterior spots like vehicle windows or signage.
- Prep: clean the area with mild soap and water or 70% isopropyl alcohol; let it dry fully.
- Apply: peel, align, and press from the center outward with a card or squeegee to push out air.
- Set: allow 24 hours for the adhesive to reach full bond; avoid heavy moisture during this time.
Tips: Avoid heavily textured or silicone-coated surfaces. For curved items, apply slowly and don’t stretch the film.
- Wipe with a soft, dry or slightly damp cloth from the center outward to lift dust and grime.
- Avoid abrasive pads, harsh solvents, or pressure washers that can dull the holographic layer.
- If placed on bottles or mugs, hand-wash is recommended. Prolonged high-heat cycles can shorten adhesive life.
Available in five sizes. Measurements refer to the longest side of the decal. A “3 inch” option is 3 inches across its largest dimension; the die-cut follows the exact contour for crisp, professional edges.
Which one do I need?
Pick by where it's going.
-
Indoors & smooth
Kiss-cut: glossy, cut on a square backing sheet so it peels cleanly.
LaptopJournalPhone caseMirror
Kiss-cuts → -
Outdoors & wet
Die-cut, holographic or clear: matte laminate, UV and water resistant, cut to the shape.
Water bottleCoolerBumperHard hat
Die-cuts → -
Behind glass
Window (reverse-print): sticks to the inside of a window and reads correctly from outside.
Car windowShop doorDorm window
Window decals →